Sticky Race Gloves - Black - XL Features: Synthetic leather for maximum durability, minimum stretch and shrinkage  Double aramid stitched in high wear areas  Double thickness palm and fingers for prot... More Details

Sticky Race Gloves - Black - XS Features: Synthetic leather for maximum durability, minimum stretch and shrinkage  Double aramid stitched in high wear areas  Double thickness palm and fingers for prot... More Details

Sticky Race Gloves - Black - XXL Features: Synthetic leather for maximum durability, minimum stretch and shrinkage  Double aramid stitched in high wear areas  Double thickness palm and fingers for pro... More Details

Sticky Race Gloves - Black - XXS Features: Synthetic leather for maximum durability, minimum stretch and shrinkage  Double aramid stitched in high wear areas  Double thickness palm and fingers for pro... More Details

Strip Boom Hanger - 64mm(2-1/2") Long Features: 64mm(2-1/2") Long 4 x 5mm(3/16") Diameter fixing holes Typically used on Dinghies, catamarans and small keelboats Grade 316 Stainless Steel More Details

Swivel Cleat & Base Swivel cleat bases permit easy cleating and releasing from any angle.Sheave can be relocated to allow the control line to feed from below Comes complete with a 28mm(1-1/4") ball be... More Details

Swivel Cleat Base Swivelling cleat unit, 15mm sheaves. Stainless steel arm, small C-Cleat™ & fairlead. Swivel cleat bases permit easy cleating and releasing from any angle.Line load should be limited ... More Details

Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope Diameter Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cl... More Details

Swivel Dead Eye & Cleat Fairlead - 3-12mm(1/8 - 1/2") Rope Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life.... More Details

Swivel Shackle - 1/4" Pin - 1-21/32"L x 19/32"W Features: Coined head pin 6.4mm(1/4") Diameter Pin Grade 316 Stainless Steel bodies and pins More Details

Swivel Shackle - 5/16" Pin - 2-3/8"L x 21/32"W Features: Coined head pin 7.9mm(5/16") Diameter Pin Grade 316 Stainless Steel bodies and pins Stainless Steel ball bearing race More Details

T-Cleat Cam Cleat - Small - Red w/Grey Base 2-8mm(3/32" - 5/16") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed ... More Details

Tell Tails - Set of 3 Pairs Essential guide for porper sail trim. Adhesive patches to ensuer permanent bond with sail. High resolution fabric tails for maximum visibility. More Details

Thimble for 4mm(5/32") Wire Grade 304 Stainless Steel More Details

Thimble for 5mm(3/16") Wire Grade 304 Stainless Steel More Details

Thimble for 6mm(1/4") Wire Grade 304 Stainless Steel More Details

Tiller Extension End Knob Suits 16mm (5/8") Diameter Tube Tiller Extensions More Details

Tiller Extension Retaining Clip Suits 20mm(3/4") Diameter Tube U.V. Stabilized Nylon More Details

Toggle Pin - 12.7mm(1/2") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel More Details

Toggle Pin - 15.9mm(5/8") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel More Details

Toggle Pin - 19mm(3/4") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel More Details

Toggle Pin - 25.4mm(1") Length 6.4mm(1/4") Diameter Grade 316 Stainless Steel More Details

Transom Gudgeon - 6.4mm(1/4") Pin/Hole Stainless Steel Rudder Hardware, 2 per order. More Details

TriggerSnap™ Shackle - 105mm The TriggerSnap™ latch mechanism allows quick and intuitive one-handed operation for attachment and release of the snap shackle. Release under load is easily accomplished ... More Details

TriggerSnap™ Shackle - 111mm The TriggerSnap™ latch mechanism allows quick and intuitive one-handed operation for attachment and release of the snap shackle. Release under load is easily accomplished ... More Details

TriggerSnap™ Shackle - 123mm The TriggerSnap™ latch mechanism allows quick and intuitive one-handed operation for attachment and release of the snap shackle. Release under load is easily accomplished ... More Details

TriggerSnap™ Shackle - 80mm The TriggerSnap™ latch mechanism allows quick and intuitive one-handed operation for attachment and release of the snap shackle. Release under load is easily accomplished b... More Details

TriggerSnap™ Shackle - 89mm The TriggerSnap™ latch mechanism allows quick and intuitive one-handed operation for attachment and release of the snap shackle. Release under load is easily accomplished b... More Details

TriggerSnap™ Shackle - 94mm The TriggerSnap™ latch mechanism allows quick and intuitive one-handed operation for attachment and release of the snap shackle. Release under load is easily accomplished b... More Details

Trunnion Snap Shackle - Large Swivel Bail - 122mm(4-3/4") Length Trunnion swivel head allows both 360° rotation and side to side articulation Materials: Grade 15-5PH investment cast stainless steel bo... More Details

Twist On Jib Hank - 3mm(1/8") Wire Piston hanks includes screws. Applications: Suitable for Keelboat, Dinghy and Trailerable yacht jibs Materials: Impact resistant, U.V. stablised Nylon More Details

Twisted Shackle - 1/2" Pin - 2-9/16"L x 3/4"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Drilled shackle pin for siezing wire More Details

Twisted Shackle - 1/4" Pin - 1-17/32"L x 9/16"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head More Details

Twisted Shackle - 3/16" Pin - 1-3/32"L x 13/32"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head More Details

Twisted Shackle - 5/8" Pin - 2-1/8"L x 5/8"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Drilled shackle pin for siezing wire More Details

Twisted Shackle - 5/16" Pin - 1-7/8"L x 5/8"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head More Details

Twisted Shackle - 5/32" Pin - 29/32"L x 11/32"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head More Details

Two-Way Link - 6mm(1/4") Pin Diameter Grade 316 Stainless Steel More Details

U-Bolt - Stepped - 38mm(1-1/2") Stud Thread:1/4" UNC U-Bolts are supplied with top plate, backing plate and nuts. Grade 316 Stainless Steel More Details

U-Bolt - Stepped - 51mm(2") Stud Thread:5/16" UNC U-Bolts are supplied with top plate, backing plate and nuts. Grade 316 Stainless Steel More Details

Utility Line Hanger - 2-Pack U.V. and impact resistant Nylon construction More Details

V-Cleat Fairlead - Medium - 4-8mm(3/16" - 5/16") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a ... More Details

V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1... More Details

V-Cleat Open - Medium - 4-8mm(3/16" - 5/16") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Features: Lightweight and corrosion proof Greater abrasion resistance ... More Details

V-Cleat Open - Small - 3-6mm(1/8" - 1/4") Rope Diameter V-Cleats are a simple solution to cleating lines under moderate loads. Features: Lightweight and corrosion proof Greater abrasion resistance tha... More Details

V-Jam Cleat - Stainless Steel - 6mm(1/4") Max Line Size A stainless steel jam cleat useful for jamming small diameter, low load lines. Ideal for dinghy halyards and outhauls, flag halyards, etc More Details

Welded Ring - 4mm(5/32") Thickness - 38mm(1-1/2") ID Round Welded Stainless Steel Ring 4mm(5/32") Thickness 38mm(1-1/2") Inner Diameter More Details

Welded Ring - 5mm(3/16") Thickness - 25.5mm(1") ID Round Welded Stainless Steel Ring 5mm(3/16") Thickness 25.5mm(1") Inner Diameter More Details

Welded Ring - 6mm(1/4") Thickness - 38mm(1-1/2") ID Round Welded Stainless Steel Ring 6mm(1/4") Thickness 38mm(1-1/2") Inner Diameter More Details

Welded Ring - 6mm(1/4") x 25mm(1") ID Welded rings are used as attachments for lines or webbing Grade 316 stainless steel Specifications: M.W.L.: 900kg(1,980lbs) B.L.:3,000kg(6,600lbs) Weight: 15g(0.5... More Details

Welded Ring - 8mm(5/16") Thickness - 42.5mm(1-5/8") ID Round Welded Stainless Steel Ring 8mm(5/16") Thickness 42.5mm(1-5/8") Inner Diameter More Details

Wide Dee Shackle - 1/2" Pin - 2-11/16"L x 1-5/16"W Features: 1/2" pin diameter Drilled shackle pin for seizing wire High strength to weight ratio More Details

Wide Dee Shackle - 1/4" Pin - 1-17/32"L x 1-7/32"W Features: 1/4" pin diameter High strength to weight ratio More Details

Wide Dee Shackle - 1/8" Pin - 15/32"L x 11/32"W Features: 3mm(1/8") slotted pin - 1/8" pin diameter High strength to weight ratio More Details

Wide Dee Shackle - 3/16" Pin - 1-3/32"L x 25/32"W Features: Slotted pin - 3/16" pin diameter High strength to weight ratio More Details

Wide Dee Shackle - 3/8" Pin - 2-7/32"L x 1-5/32"W Features: 3/8" pin diameter High strength to weight ratio More Details

Wide Dee Shackle - 5/16" Pin - 2"L x 1-3/32"W Features: 5/16" pin diameter High strength to weight ratio More Details

Winch Service Kit -  8 Pawls & 16 Springs Pawls should be inspected, and springs should be replaced every second year. It is important to use only genuine Ronstan or Andersen brand pawls and springs i... More Details

Wire Block - Ferrule Top w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave Diamter Wire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cutting the... More Details

Wire Block - Tubular Rivet Head w/Nylatron® Sheave - 25mm Sheave Diameter Wire blocks have purpose designed narrow sheaves and grooves. Applications: Wire blocks suit halyards, vang and backstay appli... More Details

Wire Block - Tubular Rivet Head w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave Diameter Wire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cut... More Details

Wire Block w/Removable Clevis Pin Head - Nylatron® Sheave - 25mm(1") Sheave Diameter Wire blocks have purpose designed narrow sheaves and grooves. Features: Removable clevis pin head Applications: Wir... More Details

Wire Rope Grip - Size 10 - 10mm(3/8") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused More Details

Wire Rope Grip - Size 12 - 12mm(1/2") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused More Details

Wire Rope Grip - Size 3 - 3mm(1/8") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused More Details

Wire Rope Grip - Size 4 - 4mm(5/32") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused More Details

Wire Rope Grip - Size 5 - 5mm(3/16") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused More Details

Wire Rope Grip - Size 6 - 6mm(1/4") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused More Details

Wire Rope Grip - Size 8 - 8mm(5/16") Diameter Wire Features: Used when adjustment in strop length is needed Stainless Steel Require no special tools for assembly and can be disassembled and reused More Details

2-3/8" Aluminum Sheave Features: Material: Aluminum Max Line 5/8" (16 mm) Max Wire 3/16" (5 mm) Outside Diameter 2-3/8" (60 mm) Inside Diameter 1/2" (13 mm) Width 3/4" (19 mm) More Details

2" Delrin Ball Bearing Sheave Specifications: Material: Delrin (BB) Max Line 1/2" (13 mm) Outside Dia. 2" (51 mm) Inside Dia 3/16" (5 mm) Width 5/8" (16 mm) More Details

3/8" Pin Chainplate Bent Specifications: Pin Hole: 3/8" (10 mm) Max. Wire: 3/16" (5 mm) Fastener Holes: (4) 3/8" (10 mm) Length: 10" (254 mm) Width: 1-1/4" (31 mm) Thickness: 1/8" (3 mm) Weight: 6.6 o... More Details

5 Series Cheek Pad Adapts to Spars 5 Series cheek block pad. Urethane material allows any 5 series cheek block to have a solid fit to a spar that measures 2-1/2" to 6" dia. Spar section. (64mm-152mm),... More Details

Aluminum Deck Cleat - 4" Length 4" (102 mm), Line Score 3/8" (10 mm), Fasteners (2), #10 FH (5 mm), C/C A 1" (25 mm), Weight 1.5 oz. (43 g) More Details

Aluminum Deck Cleat - 5" Length 5" (127 mm), Line Score 1/2" (13 mm), Fasteners (2), #12 FH (6 mm), C/C A 1-1/4" (32 mm), Weght 2 oz. (57 g) More Details

Aluminum Deck Cleat - 6" Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g) More Details

Aluminum Deck Cleat - 8" Length 8" (203 mm), Line Score 5/8" (16 mm), Fasteners (2), 5/16" FH (8 mm), C/C A 2" (51 mm), Weght 8.5 oz. (240 g) More Details

Backing Plate for 704-02-62 Schaefer Stainless Steel Backing Plate for 704-02-62. More Details

Bullseye Deck Fairlead Max Line 1/2" (13 mm), L 1-7/16" (36 mm), W 11/16" (18 mm), H 1-5/32" (29 mm), Bearing Height 7/16" (11 mm), Center to Center Fasteners, 1" (25mm), #10 RH. This product may not ... More Details

Cam Fairlead - Black Mounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners. More Details

Cam Fairlead - Red Mounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners. More Details

Clamp-On Furling Line Stanchion Lead Block - 1" Ball Bearing Delrin™ ball bearing sheave allows for quick and easy furling line adjustment. Stainless steel cage and strap ensure durability.  Specifica... More Details

Clear Step Lead Block for 1" Stanchions Unique design leads your furling control line outside of your stanchions for a clean lead aft to the cockpit. Stainless cheeks with Delrin(tm) ball bearing shea... More Details

Double Stanchion Tube - 24" Double lifeline stanchion is 24" tall and accepts up to 5/16" (8mm) diameter coated wire. Works with Schaefer base 36-01. L 24" (610 mm), W 1" (25 mm), T 1/16" (1.5 mm), We... More Details

Double Stanchion Tube - 26" Double lifeline stanchion is 26" tall and accepts up to 5/16" (8mm) diameter coated wire. Works with Schaefer base 36-01. L 26" (660 mm), W 1" (25 mm), T 1/16" (1.5 mm), We... More Details

Exit Plate/Flat for up to 1/2" Line Specifications: Halyard Size 1/2" (12 mm) Mast Stat Opening 2-1/4"x 13/16" (57 mm x 21 mm) Fasteners (4), #10 RH (5 mm) Weight 1 oz. (28 g)  More Details

Fast Entry Cam Cleat - Large Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 500 l... More Details

Fast Entry Cam Cleat - Small Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 200 l... More Details

Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm 70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry at various a... More Details

Furler Pull Back Bracket/Haylard Restrainer - Large Halyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap. ... More Details

Exit Plate/Flat for up to 3/4" Line Specifications: Halyard Size 3/4" (19 mm) Mast Stat Opening 3-1/4"x 1" (83 mm x 25 mm) Fasteners (4), #10 RH (5 mm) Weight 1 oz. (28 g) More Details

Handi-Hanger Handi-Hangers are used in the cockpit or stern pulpit to organize line, fenders, life rings, hose etc. Use on 7/8" or 1" tubing, coated lifeline or remove the backing to mount on a bulkhe... More Details

Investment Cast Pad Eye - 2-1/2" OD Base 316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-53 separately.  Specifications: Eye Width 1" (25 mm) Eye Height 13/16" (21 mm) Eye Stock 3... More Details

Investment Cast Pad Eye - 3" OD Base 316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-54 separately.  Specifications:  Eye Width 1-1/8" (29 mm) Eye Height 7/8" (22 mm) Eye Stock 1/... More Details

Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earl... More Details

Mid-Rail Chock/Cleat Stainless Steel Schaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earl... More Details

Pulpit Furling Lead Spring Loaded Block - 1" Ball Bearing The Stainless Steel spring guarantees maximum support for the block. Delrin™ ball bearing sheave ensures low-friction lead for your furling li... More Details

Quick Release Pin - 1/4" x 1.5" Grip Quick Release Pin, 1/4" x 1.5" Grip. 316 Stainless Steel. Safe Working Load 3000 lbs. More Details

Quick Release Pin - 1/4" x 1" Grip Quick Release Pin, 1/4" x 1.0" Grip. 316 Stainless Steel. Safe Working Load 3000 lbs. More Details

Quick Release Pin - 1/4" x 2" Grip Quick Release Pin, 1/4" x 2.0" Grip. 316 Stainless Steel. Safe Working Load 3000 lbs. More Details