Rod Holder Accessories

Sure-Grip Flat Rail Base - Fits Square Rail This Attwood Sure-Grip Flush Mount can fit square rails and is constructed out of extruded aluminum.  Specifications: Base: Flat rail base Fits: Square rail... More Details

70 Series Socket for Screwless Rod Holder Installation Features: Required for the installation of screwless rod holders Fits 1/2" drive ratchet wrenches This product may not be returned to the origina... More Details

80 Series Wrench for Screwless Rod Holder Installation Crowsfoot Wrench Features: For use with 80 Series Screwless Rod Holders Allows for installation in locations with limited space This product may ... More Details

70 Series Backing Plate for Flush Mount Rod/Cup Holder Features: Cast 316L Stainless Steel Distributes pressure evenly over 30 times more surface area than washers More Details

70 Series Wrench for Screwless Rod Holder Installation Crowsfoot Wrench Features: For use with 70 Series Screwless Rod Holders Allows for installation in locations with limited space This product may ... More Details

Backing Plate for 70 Series Rod Holders Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and wash... More Details

Backing Plate for 80 Series Rod Holders Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and wash... More Details

Drop-in Swivel Drop-in Swivel instantly converts any in-gunnel rod holder to a swivel rod holder. Fits inside any rod holder with 1-9/16" or larger inside diameter. Investment cast 316L stainless cons... More Details

Replacement Liner for 70 Series - White Replacement liner for 70 series in-gunnel and clamp-on rod holders. This UV-resistant vinyl liner protects rods. Features: Recessed liner (doesn't come to the t... More Details

Replacement liner for 80 series in-gunnel rod holder, 11" long, cut to desired angle and length. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is k... More Details

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy re... More Details

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy re... More Details

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy re... More Details

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy re... More Details

NEW - Innovative Trolling System Puts You In Control Aluminum Mounting Track This versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy re... More Details

Deck Mount Plate This adaptable 4" x 3" plate works with Cannon dual axis rod holders, pedestal mount tracks and downrigger pedestal mounts. Plates can be mounted in a variety of locations, and a prot... More Details

Extension Post f/Cannon Rod Holder - 2-Pack Features: Extends height of rod holder by 6" Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in p... More Details

Allows rod holder to mount into the gunnel of the boat. Alignment key allows for 360 degree pivot while holding rod holder securely in place. Includes water-tight cap. More Details

Allows side/deck mount to attach to rail. Adjustable to fit different diameter rails. More Details

Rail Mount For mounting our single axis rod holder, this convenient rail mount attaches to either round or square rails. For 3/4" to 1-1/4" Accessories SKU 33700 — MFG# 1907001 More Details

Bracket can be mounted on vertical or horizontal surface. Alignment key allows for 360 pivot while holding rod holder securely in place. More Details

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 10", 0-Degree These are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. Th... More Details

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 10", 15-Degree These are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. T... More Details

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 10", 30-Degree These are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. T... More Details

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 0-Degree These are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. T... More Details

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 15-Degree These are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. ... More Details

Heavy-Duty Replacement Rod Holder Inner Tube Sleeve - 8.5", 30-Degree These are the Heavy Duty rod holder Inner Sleeves (FXD/ROT) for 30-degree / 15-degree / 00-degree rotating and fixed rod holders. ... More Details

Rotating Rod Holder 0-Degree Drain Attachment This is the Drain Attachment for the 0-degree rotating rod holder, made of 316 stainless steel and a brass swiveling pipe clamp. Specially designed by Exp... More Details

Rotating Rod Holder 30 & 15-Degree Drain Attachment This is the Drain Attachment for the 30 & 15 degree rotating rod holder, made of 316 stainless steel and a brass swiveling pipe clamp. Specially des... More Details

Service Kit 360 for Rotating Holder After many years of use, the 360 Rotating Rod Holder range can show signs of normal wear. This Service Kit can be easily installed for the extended longevity of the... More Details

Universal Backing Plate This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. The backing plate is 3mm/0.1" thick. More Details

PVC Drain Cap f/Heavy Rod Holders 1/4" NPT PVC Drain Cap for Heavy Rod Holders - 1/4" NPT for hose barb More Details

RH5930 Stainless Steel Backing Plate for 0°, 15° & 30° Heavy Rod Holders. More Details

RH5931 Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders. More Details

Vinyl Rubber Inserts Clamp-On Rod Holder Rubber Inserts Outside diameter is about 1-7/8” or (1.902”) inches. Inside diameter is about 1-5/8” inches. Overall length is 7-1/2” inches More Details

RH511 0 degree Medium Duty Vinyl Rubber Insert for RH510, RH527V, RH5112, RH552CB, & RH552XL  More Details

RH516 0 Dedree Heavy Duty Vinyl Rubber Insert for RH515, RH532, CH110, RH532V, RH532VS/XS More Details

RH526 30 degree Medium Vinyl Rubber Insert for RH525, RH525SS, RH5325 RH52XS  More Details

RH531 30  Degree Heavy Duty Vinyl Rubber Insert for RH530, RH530SS, RH5330, RH530SS/XS, RH575 More Details

RH535 15 Degree Heavy Duty Vinyl Rubber Insert for RH534H, RH534HS, RH5334H, RH579H More Details

Rod Butt Extender for Standard & Heavy Swivel Base Rod Holders Comes with one rod butt extender that is extra strong! Made of pure stainless steel. Used on short-butt rods and heavy-duty rod holders a... More Details

Rod/Reel Hanger Penn INTL 130VIS - Bright Gold Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into the Closed... More Details

RH528 15 Degree Medium Vinyl Rubber Insert for RH529H, RH529HS, RH5329H, RH529XS More Details

Elbow Adapter 3/8″ NPT, 1/2″ Barb More Details

Stainless Steel Backing Plate Specifically for use with all Mate Series Rod and Cup Holders. More Details

Stainless Steel Cap for Oval Plastic Rod Holders Features For use with P2030B and P2030W For plastic rod/cup holders with oval top  More Details

Stainless Steel Cap for Round Plastic Rod Holders Features For use with P1000B, P1000DW, P1015DB and P1015DW For plastic rod/cup holders with round top More Details

Stainless Steel Rod & Cup Holder Threaded Backing Plate This threaded backing plate is designed to be used with ALL Mate Series Combination Rod and Cup Holders EXCEPT Elite Screw-less. Features: Cast ... More Details

Straight Adapter 3/8″ NPT, 1/2″ Barb More Details

Tee Adapter 1/2″ Barb, 1/2 Barb, 1/2″ Barb More Details

Rod Holder Cap & Gasket Kit Features: Soft Black Flange Gasket with Integral Flip-Up CapSoft Black Lip Replacement or Upgrade for Older Holders More Details

Poly Rod Strap The Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market. These straps are molded of black polyurethane material that will retain its s... More Details

Backing Plate - Large These stainless steel backing plates are a perfect match for Rupp Rod Holder installations. Securely mounts with regular or large rod holders. Sold individually. More Details

Backing Plate - Standard These stainless steel backing plates are a perfect match for Rupp Rod Holder installations. Securely mounts with regular or large rod holders. Sold individually. More Details

0343 Locking Gunnel Track Mount Purpose-built for boats with integrated gunnel tracks, the 343 securely attaches to your vessel without the need to drill holes, or carry tools.  This simple, intuitive... More Details

320 Adaptable Rail Mount for 2" Rail Features: The 320 rail mount adaptor can be positioned almost anywhere along a 2″ rail Includes a pair of inserts for both 1½” round rails, and the 1¼” square rail... More Details

340L Nylon Track Adapter Features: Enables you to use all Scotty Rod Holders with 3 1/2″ wide track systems Made with glass-filled nylon Fits Bert’s, Trax Tech, etc... Includes stainless steel fastene... More Details

6 Pole Rod Storage Rack with Horizontal or Overhead Mount Constructed of extremely durable, high-strength UV-resistant polypropylene. Rods are secured with bungee cord attachment. Installs with twelve... More Details

LED RGB Rod Holder with Tube Insert These LED RGB Rod Holders to have translucent tube inserts with bright RGB LEDs and a 30° angle. Or retrofit your existing rod holder with the LED RGB Tube Insert (... More Details

LED Rod Holder Cap Light - 2" Diameter LED RGB Rod Holder Cap attaches to the bottom of any 2” diameter rod holder. A Bluetooth Smart Phone Controller (403051-1) lets you operate this RGB LED Rod Hold... More Details

LED Tube Insert for Existing Rod Holders 11' Long Cut To Fit Any Angle Retrofit your existing rod holder with the LED RGB Tube Insert. Just remove your existing liner, install the LED RGB Tube Insert,... More Details

Mounting Plate for 325190 Rod Holder  Mounting Plate only for the 325190 30° removable rod holder. WARNING: This product can expose you to chemicals which are known to the State of California to cause... More Details

Optional Bluetooth Smart Phone Controller - RGB Using Bluetooth technology, this RGB LED controller lets you operate LED RGB Rod holders (325181), LED RGB Tube inserts (325189), LED RGB Rod holder cap... More Details

Rod Holder Liner for 2200 Series Rod Holders - Black Anti-fungal, high-quality PVC liners that fit into flared-style aluminum rod holders. Features & Benefits: Stylish design Protects reels from being... More Details

Rod Holder Liner for 2200 Series Rod Holders - White Anti-fungal, high-quality PVC liners that fit into flared-style aluminum rod holders. Features & Benefits: Stylish design Protects reels from being... More Details

10' Safety Straps - Pair Black w/Tigress Logo More Details

10" Flared Vinyl Replacement Insert Liner - Black For Aluminum Weld-On Rod Holders  Features: For 10" Flared Rod Holders More Details

10" Flared Vinyl Replacement Insert Liner - White For Aluminum Weld-On Rod Holders  Features: For 10" Flared Rod Holders More Details

2" SS Rod Holder Extension Rod holder extenders used to shorten your rod holder to fit your bent butt fishing rod Fits most medium and large rod holders and are 1.51" wide More Details

4" Nylon Rod Holder Extension Rod holder extenders used to shorten your rod holder to fit your bent butt fishing rod Fits most medium and large rod holders and are 1.51" wide More Details

4" SS Rod Holder Extension Rod holder extenders used to shorten your rod holder to fit your bent butt fishing rod Fits most medium and large rod holders and are 1.51" wide More Details

Flared Vinyl Replacement Insert Liner - Black For Aluminum Weld-On Rod Holders  Features: For 8-1/2" Flared Rod Holders More Details

8-1/2" Ribbed Replacement Vinyl Insert Liner - White For Aluminum Weld-On Rod Holders For 8-1/2 flared rod holders. More Details

9" Backing Plate for Screwless Rod Holders - Stainless Steel Features: For 9" Screwless Rod Holder More Details

Adjustable Deep Drop Lead Holder Features: Fits into gunnel rod holder Adjustable angles, 0, 15 and 30 degree Protect your boat and rod holders from damage Perfect for Sword Fishing and Deep Dropping ... More Details

Backing Plate for 10.5" Screwless Swivel Rod Holder Features: For 10.5" Screwless Rod Holder More Details

Black Plastic Cup Holder Insert w/SS Ring On Top Mates with PCHE More Details

Large Replacement Vinyl Insert - Straight - 10-1/2" Large replacement vinyl insert for 10-1/2" rod holders 88520 & 88530 Series More Details

Lipped Insert for 10" Flared Rod Holder - Black Features: Protective lip protects top of rod holder an also protects your spinning gear For 10" flared rod holder Color: Black More Details

Lipped Insert for 10" Flared Rod Holder - White Features: Protective lip protects top of rod holder an also protects your spinning gear For 10" flared rod holder Color: White More Details

Medium Rod Holder Backing Plate Backing plate for medium rod holders More Details

Nylon Pipe to Hose Adapter - 1/4" IPS Nylon Pipe to Hose Adapter - 1/4" IPS More Details

Portable Cleat - 15" Tall with 9" Cleat Features: Constructed of anodized aluminum Perfect for holding a fender at the sandbar, using as an extra cleat, or using as a hose holder while washing your bo... More Details

Portable Cleat - 36" Tall with 9" Cleat  Features: Constructed of anodized aluminum Perfect for holding a fender at the sandbar, using as an extra cleat, or using as a hose holder while washing your b... More Details

Replacement Offshore Weld-On Vinyl Insert - Flared - 10-1/2" Replacement Offshore Weld-On Vinyl Insert for 10-1/2" rod holders More Details

Replacement Vinyl Insert - 0° - 9" - Black Replacement vinyl insert for 9" rod holders More Details

Replacement Vinyl Insert - 0° - 9" - White Replacement vinyl insert for 9" rod holders More Details

Replacement Vinyl Insert - 15° - 9" - Black Replacement vinyl insert for 9" rod holders More Details

Replacement Vinyl Insert - 15° - 9" - White Replacement vinyl insert for 9" rod holders More Details

Replacement Vinyl Insert - 30° - 9" - Black Replacement vinyl insert for 9" rod holders More Details

Replacement Vinyl Insert - 30° - 9" - White Replacement vinyl insert for 9" rod holders More Details

Round Head Rod Holder Backing Plate Round head backing plate for rod holders More Details

SS Swivel Rod Holder Adapter Stainless steel swivel rod holder adapter 2-1/2"L x 1-1/2"W More Details

Stainless Steel Pipe to Hose Adapter - 1/4" IPS Stainless Steel Pipe to Hose Adapter - 1/4" IPS More Details

T-Top Rod Safety Straps - Pair Black More Details

Universal Backing Plate Universal backing plate for rod holders More Details

Wrench for 10.5" Screwless Swivel Rod Holder Features: For 10.5" Screwless Rod Holder More Details

Wrench for 9" Rod Holder Fastener - Screwless Features: For 9" Screwless Rod Holder More Details

XD Flag Pole Specifications: • 42” Rod Holder Flag Pole • Holds two 12” sandbar flags or one 20”x 24” dive flag • Gimbal butt makes flying in any rod holder a breeze • Made of anodized aluminum • Easy... More Details

HX Rod Holder Flag Pole - 54" Features: Gimbal butt makes flying in any rod holder a breeze Made of anodized aluminum Easy to store Fits standard 1-5/8” rod holders 54” Rod Holder Flag Pole Holds 36" ... More Details