Rod Holders

Side Mount Rod Holder - Flat Dark Earth This side-mount rod holder features an integral, molded-in standoff located on the back of the rod holder. This standoff allows direct mounting to any flat surf... More Details

Side Mount Rod Holder - Flat Dark Earth This flush-mount rod holder can accommodate rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV-resistant injection-molded ABS. Installs with... More Details

Side Mount Rod Holder - Grey  Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mo... More Details

Side Mount Rod Holder - White  Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct m... More Details

Stainless Steel 90° Flush Mount Rod Holder  A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic line... More Details

Stainless Steel Flush Mount Rod Holder - 30°  Flush Mount Rod Holders are constructed of corrosion resistant investment cast 316 stainless steel. Features a 30° angle. Accommodates rods up to 1-1/2”. ... More Details

Stainless Steel Flush Mount Rod Holder with Cap - 30°  Flush Mount Rod Holder with Cap is constructed of corrosion resistant formed 316 stainless steel with a UV resistant PVC cap and full length PE l... More Details

Stainless Steel Flush Mount Rod Holder with Cap - 90°  A high quality, vertical mount rod holder! These 90° Flush Mount Rod Holders are constructed of investment cast 316 stainless steel with a plasti... More Details

Stainless Steel Side Mount Removable Rod Holder  Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting... More Details

Stainless Steel Side Mount Rod Holder  Side Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8” in diameter. Inst... More Details

Triple Threat Three Pole Rod Holder - Black The Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. Th... More Details

Triple Threat Three Pole Rod Holder - Flat Dark Earth The Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods... More Details

Triple Threat Three Pole Rod Holder - White The Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. Th... More Details

ABS Plastic Rod Holder - 3 Rod - Pair with Bungee ABS plastic with foam inserts. Holds up to 3 rods and can be installed vertically or horizontally. Foam inserts and a bungee latch. Sold in pairs. More Details

Stainless Steel Clamp-On Rod Holder Stainless Steel Type 316 Polished Features and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and... More Details

Stainless Steel Clamp-On Rod Holder Stainless Steel Type 316 Polished Features and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and... More Details

3-Rod Poly Rod Rack Deluxe Durable polyethylene to withstand the harsh marine environment Flared rod holder for easy rod handling Slotted rod holders lock in most conventional & spinning outfits Delux... More Details

4-Rod Poly Rod Rack Deluxe Durable polyethylene to withstand the harsh marine environment Flared rod holder for easy rod handling Slotted rod holders lock in most conventional & spinning outfits Delux... More Details

Deluxe Trident Rod Holder Cluster Offset TACO's strong and durable high-polished aluminum 3-rod holder cluster with an offset is designed to maximize rod placement and usage on your boat. Great for ki... More Details

Deluxe Trident Rod Holder Cluster Straight TACO's strong and durable high-polished aluminum 3-rod holder cluster is designed to maximize rod placement and usage on your boat. Great for kite fishing or... More Details

TACO Flared Weld-On Rod Holder 9-3/4"L x 1-3/4"ID - White Liner Polished Finish Taco Marine weld-on Aluminum rod holder is Brite Dip anodized for lasting protection and superior luster. Specially form... More Details

Flared Weld-On Rod Holder 9-3/4"L x 1-3/4"ID - White Liner Polished Finish - 3/8" Coped Blade Taco Marine weld-on Aluminum rod holder is Brite Dip anodized for lasting protection and superior luster. ... More Details

Flush Mount Rod Holder 10° - Deluxe Anodized Finish Aluminum 10º Rod Holder with Round Flange for 5-1/2" Tube. Also pairs with the Carbon Fiber Tele-Sun Shade Pole. Features: Tube section length is 5-... More Details

Kite Fishing 3-Rod Cluster One of the most useful fishing tools you can have when kite fishing is the TACO Marine Kite Fishing Rod Cluster, which allows you the freedom to place your kite fishing outf... More Details

Olympic 5-Rod Holder Cluster Superior to the competition, TACO Marine's Olympic Rod Holder Cluster "Five-Banger" is the ultimate in on-boat and transportable rod storage. The ability to store, transpo... More Details

Stand-Off Mount Rod Holder Features: White UV-Stabilized Polyethylene Front Access Hole & Integrated Stand-Offs for Easy Mounting Stainless Hardware Not Included This product may not be returned to th... More Details

Stand-Off Mount Rod Holder Features: White UV-Stabilized Polyethylene Front Access Hole & Integrated Stand-Offs for Easy Mounting Stainless Hardware Included This product may not be returned to the or... More Details

Thru-Bolt Mount Rod Holder Features: White UV-Stabilized Polyethylene Front Access Hole Pre Drilled Mounting Holes Stainless Hardware Not Included This product may not be returned to the original poin... More Details

Stainless Steel Clamp-On Rod Holder Stainless Steel Type 316 Polished Features and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and... More Details

1-1/2" Polished SS Adjustable Clamp-On Rod Holder Choose the angle you need while providing the versatility of mounting either horizontally or vertically Clamp-on rod holders are sized IPS pipe Includ... More Details

1-1/4" Polished SS Adjustable Clamp-On Rod Holder Choose the angle you need while providing the versatility of mounting either horizontally or vertically Clamp-on rod holders are sized IPS pipe Includ... More Details

1" Polished SS Adjustable Clamp-On Rod Holder Choose the angle you need while providing the versatility of mounting either horizontally or vertically Clamp-on rod holders are sized IPS pipe Includes a... More Details

10.5" 0-Degree Swivel Rod Holder - Screwless - Stainless Steel Features: 316 Stainless Steel 2-5/8" Cut Out Requires Installation Wrench Accessories SKU 106099 — MFG# 77278-1 SKU 106100 — MFG# 77274-1 More Details

10.5" 15-Degree Swivel Rod Holder - Screwless - Stainless Steel Features: 316 Stainless Steel 2-5/8" Cut Out Requires Installation Wrench Accessories SKU 106099 — MFG# 77278-1 SKU 106100 — MFG# 77274-... More Details

3 Hole Swivel Oval Head Rod Holder - 0° - 10-1/2" Head Size: 3.85" x 4.88" Angle: 0° Head Length: 10-1/2" Inner Diameter: 1-7/8" Accessories SKU 67311 — MFG# 90919 SKU 67312 — MFG# 90923 SKU 67316 — M... More Details

3 Hole Swivel Oval Head Rod Holder - 15° - 10-1/2" Head Size: 3.85" x 4.88" Angle: 15° Head Length: 10-1/2" Inner Diameter: 1-7/8" Accessories SKU 67311 — MFG# 90919 SKU 67312 — MFG# 90923 SKU 67316 —... More Details

3/4"-1" Adjustable Clamp-On Rod Holder Improved version of the old standard rail mount rod holder 316 stainless steel clamp mechanism with high polished stainless tube White vinyl liner for rod protec... More Details

4 Hole Extra Long Swivel Rectangular Head Rod Holder - 0° - 12-1/2" Head Size: 4.25" x 4.75" Angle: 0° Head Length: 12-1/2" Inner Diameter: 1-7/8" Accessories SKU 63646 — MFG# 88530-3 SKU 67311 — MFG#... More Details

4 Hole Extra Long Swivel Rectangular Head Rod Holder - 15° - 12-1/2" Head Size: 4.25" x 4.75" Angle: 15° Head Length: 12-1/2" Inner Diameter: 1-7/8" Accessories SKU 63646 — MFG# 88530-3 SKU 67311 — MF... More Details

4 Hole Swivel Rectangular Head Rod Holder - 0° - 10-1/2" Head Size: 4.25" x 4.75" Angle: 0° Head Length: 10-1/2" Inner Diameter: 1-7/8" Accessories SKU 63646 — MFG# 88530-3 SKU 67311 — MFG# 90919 SKU ... More Details

4 Hole Swivel Rectangular Head Rod Holder - 15° - 10-1/2" Head Size: 4.25" x 4.75" Angle: 15° Head Length: 10-1/2" Inner Diameter: 1-7/8" Accessories SKU 63646 — MFG# 88530-3 SKU 67311 — MFG# 90919 SK... More Details

4 Rod Aluminum Transom Mount Rod Holder - 28" Features: Constructed of cold-drawn anodized aluminum Includes white liners to protect your rod More Details

5 Rod Aluminum Transom Mount Rod Holder - 35" Constructed of cold drawn anodized aluminum Includes white liners to protect your rod More Details

9" 0-Degree Rod Holder - Screwless - Stainless Steel Features: 316 Stainless Steel 2-1/8" Cut Out Requires Installation Wrench Accessories SKU 106095 — MFG# 77274 SKU 106096 — MFG# 77275-1 More Details

9" 15-Degree Rod Holder - Screwless - Stainless Steel Features: 316 Stainless Steel 2-1/8" Cut Out Requires Installation Wrench Accessories SKU 106095 — MFG# 77274 SKU 106096 — MFG# 77275-1 More Details

9" 30-Degree Rod Holder - Screwless - Stainless Steel Features: 316 Stainless Steel 2-1/8" Cut Out Requires Installation Wrench Accessories SKU 106095 — MFG# 77274 SKU 106096 — MFG# 77275-1 More Details

9" Side Mount Rod Holder - 1-5/8" I.D. 316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practical Can be mounted on any vertical flat surface White vinyl ins... More Details

9" Swivel Side Mount Rod Holder - 1-5/8" I.D. 316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practical Can be mounted on any vertical flat surface White vi... More Details

Blind Mount Round Head Closed Base Rod Holder - 30° - 9" Eliminate fastening from the top of flange and enhance the look of your gunnel With drain hole to accept 1/4" NPT pipe to hose fitting Head Siz... More Details

Bolt On Transom Mount Rod Holder Features: Polished aluminum 4 hole 3" x 4-1/2" brushed pad 10" flared rod holder WARNING: This product can expose you to chemicals including LEAD which is known to the... More Details

Console Double Spinning Rod Holder Features: Polished aluminum Internal threaded 1/4-20 WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to ca... More Details

Economy Stainless Steel Gunnel Mount Rod Holder- 0° Features: 316 Stainless Steel Black Liner 9” w/ Oval Cast Flange Top Pin Base Accessories SKU 67311 — MFG# 90919 SKU 67312 — MFG# 90923 SKU 67316 — ... More Details

Economy Stainless Steel Gunnel Mount Rod Holder- 15° Features: 316 Stainless Steel Black Liner 9” w/ Oval Cast Flange Top Pin Base Accessories SKU 67311 — MFG# 90919 SKU 67312 — MFG# 90923 SKU 67316 —... More Details

Economy Stainless Steel Gunnel Mount Rod Holder- 30° Features: 316 Stainless Steel Black Liner 9” w/ Oval Cast Flange Top Pin Base Accessories SKU 67311 — MFG# 90919 SKU 67312 — MFG# 90923 SKU 67316 —... More Details

Five Banger Aluminum Rod Holder - Bent Butt Features: Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reach Constructed of cold drawn high polished anodiz... More Details

Five Banger Aluminum Rod Holder - Straight Butt Features: Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reach Constructed of cold drawn high polished an... More Details

Five Rod Cluster - Bent Butt - Polished Aluminum Features: Smaller, more compact than Tigress' Five Banger Aluminum Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rod... More Details

GS Trident Rod Holder - Bent Butt - Polished Aluminum Features: Smaller, more compact than our original Triple Kite Rods  Used for one kite rod and two additional rods to increase your rod storage cap... More Details

GS Trident Rod Holder - Straight Butt - Polished Alumunim Features: Smaller, more compact than our original Triple Kite Rods  Used for one kite rod and two additional rods to increase your rod storage... More Details

Offset Triple Aluminum Rod Holder - Straight Butt Features: Triple offset can be used port or starboard Additional rod storage or for kite fishing Constructed of anodized aluminum Tube ID 1-7/8" Base ... More Details

Offset Triple Rod Holder w/Cup Holders - Port Side - Polished Aluminum Features: This quality rod holder can be used for rod storage and is most useful in kite fishing Cups allow for holding rigging t... More Details

Offset Triple Rod Holder with Cup Holders - Starboard Side - Polished Aluminum Features: This quality rod holder can be used for rod storage and is most useful in kite fishing Cups allow for holding r... More Details

Oval Head Closed Base Rod Holder - 0° - 9" Heavy duty oval head closed end base, with drain hole to accept 1/4" NPT pipe to hose fitting Head Size: 3.28" x 4.06" Length: 9" Angle: 0° Head Inner Diamet... More Details

Oval Head Closed Base Rod Holder - 15° - 9" Heavy duty oval head closed end base, with drain hole to accept 1/4" NPT pipe to hose fitting Head Size: 3.28" x 4.06" Length: 9" Angle: 15° Head Inner Diam... More Details

Oval Head Closed Base Rod Holder - 30° - 9" Heavy duty oval head closed end base, with drain hole to accept 1/4" NPT pipe to hose fitting Head Size: 3.28" x 4.06" Length: 9" Angle: 30° Head Inner Diam... More Details

Oval Head SS Gunnel Mount Rod Holder - 0° - 9" Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 0° Head Inner Diameter: 1-5/8" Accessories SKU 63642 — MFG# 77900-2 SKU 63644 —... More Details

Oval Head SS Gunnel Mount Rod Holder - 15° - 9" Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 15° Head Inner Diameter: 1-5/8" Accessories SKU 63642 — MFG# 77900-2 SKU 63644... More Details

Oval Head SS Gunnel Mount Rod Holder - 30° - 9" Crafted of 316 Stainless Steel Head Size: 3.28" x 4.06" Length: 9" Angle: 30° Head Inner Diameter: 1-5/8" Accessories SKU 63642 — MFG# 77900-2 SKU 63644... More Details

Round Head Closed Base Rod Holder - 0° - 9" Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting. Head Size: 3.85" Length: 9" Angle: 0° Head Inner Diameter: ... More Details

Round Head Closed Base Rod Holder - 15° - 9" Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting. Head Size: 3.85" Length: 9" Angle: 15° Head Inner Diameter... More Details

Round Head Closed Base Rod Holder - 30° - 9" Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting. Head Size: 3.85" Length: 9" Angle: 30° Head Inner Diameter... More Details

Stainless Steel Rod Rigger Allows for your rods to give you a better fishing spread. More Details

Straight Side Mount Transom Rod or Console Rod Holder 8-1/2" Features: 4 hole 3" x 4-1/2" brushed pad Constructed of cold drawn anodized aluminum WARNING: This product can expose you to chemicals incl... More Details

Triple Aluminum Kite Rod Holder - Bent Butt - Polished Features: Rod holder is used for 1 kite rod and 2 additional rods to increase your rod storage capacity and keep them up and out of the way Const... More Details

Triple Aluminum Kite Rod Holder - Straight Butt - Polished Features: Rod holder is used for 1 kite rod and 2 additional rods to increase your rod storage capacity and keep them up and out of the way C... More Details

Weld On Aluminum Flared Rod Holder with Blade 10" Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to c... More Details

Weld On Aluminum Flared Rod Holder with Blade Mill Finished 10" Specifications:  Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of ... More Details

Weld On Aluminum Flared Rod Holder without Blade 10"  Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California ... More Details

Weld On Aluminum Flared Rod Holder without Blade Mill Finished 10"  Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State ... More Details

5 Rod Cluster Features a 30° bent butt, welded gimbal pins, anodized aluminum finish, handcrafted in the USA at a fraction of competitors prices plus easily stores 5 rods from any one rod holder. More Details

BOOMSTICK Part #: 121 Designed to put as many as 3 lines either port or starboard, PLUS another line from the stern. More Details

Boomstick Jr Designed to put as many as 2 lines either port or starboard, PLUS another line from the stern More Details

Double Rod Holder Part #: 105 The double rod holder, with its bent butt and angled rod holders, plus solid weld contruction from 60 series aluminum, gives the fisherman the opportunity to fish two lin... More Details

Double Rod Rigger Part #: 108 The double rod rigger is the new way to fish a rod rigger. We start with a tough 60 series aluminum with the same ability of a traditional rod rigger to fish either starb... More Details

Offset Triple Rod Holder Offset Kite Cluster Rod Holder More Details

Single Rod Rigger Part #: 102 Our single rod rigger with its machined slots and welded construction offers an affordable side rigger to all fisherman. Constructed from high quality 60 series aluminum ... More Details

Triple Rod Holder - 30° Bent Butt Much like our double rod holder, the fisherman now has three options from one holder. It has a solid weld construction, bent butt and is made from high quality alumin... More Details

Universal Rocket Launcher Part #: 106 From catfishing to trolling for big game, our stout four-rod rocket launcher was built to handle demanding fish. Its universal design allows for just about any mo... More Details

Universal Truck Rod Rack Features: Adjusts from 53.5"-67.5" Adjustable angle 6 Rod Holders Drill bit and SS Hardware included More Details

30° Flush Mount Rod Holder - 304 Stainless Steel - 9-1/4" Features: Length: 9-1/4" Flange: 3-3/8" x 4-1/4" Tube Inner Diameter: 1-5/8" Fastener: 5/16"(3) Material: 304 Stainless Steel Accessories SKU ... More Details

Description: 304 S.S. 4-Tube Rocket Launcher. Overall Length: 34" Tube Length: 10" Inside diameter of tube: 1-5/8" Base Diameter: 2-1/2" Fastener - #10 (6) (Not Included) More Details

Description - Cast 316 S.S. with full length vinyl liner. Fastener 1/4" Material: 316 Stainless Steel Fastener: 1/4" (3) Dimensions: L: Tube Length: 8-5/8" Flange: 3-5/16" x 4-5/16" Inside Diameter: T... More Details

Bluewater 30 Deg. Stamped S.S. Flush Mount Rod Holder Description: Stamped SS construction with full white vinyl liner and gasket. Strong, durable, yet very economical. Material: 304 Stainless Steel F... More Details

Description: 304 S.S. removable rod holder Tube length: 9" Tube Inside Diameter: 1-7/8" Plate - 4"x3-3/4" Fastener - 5/16" (4) More Details

Removable Outrigger Holder - Made of 304 S.S. Fits into any standard flush mount rod holder. Tube length: 12" Tube Inside Diameter: 1-5/8" Height: 17-1/2 More Details

Bracket: 316 S.S. - Fits 7/8" & 1" Rails Material: 304 Stainless Steel Dimensions: L: 10" Inside Diameter: 1-7/8" More Details

Description: The new 316 Stainless Steel 360 Removable Rod Holder is the angler's dream. Dimensions: H: 3-5/8" x 2-1/2" Base: 1-5/8" Inside Diameter: 8-5/8" More Details

Rod/Cup Holder - 304 Stainless Steel - 0° Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes ... More Details

Rod/Cup Holder - 304 Stainless Steel - 15° Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes... More Details

Rod/Cup Holder - 304 Stainless Steel - 30° Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes... More Details