Select Category
_0x200.jpg)
Weld Mount AT-850 Square Mixing Tip f/2010, 4010, & 8040 Adhesive - 4" case of 50
Weld Mount AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives 4" - Case of 10
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 1" OD - Requires 1.75" Stud - Qty. 25
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 1/2" OD - Requires 1.5" Stud - Qty. 25
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 3/4" OD - Requires 1.75" Stud - Qty. 25
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 3/8" OD - Requires 1" Stud - Qty. 25
Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 5/8" OD - Requires 1.5" Stud - Qty. 25
Weld Mount S008013 10:1 Plunger Only For At-300 Adhesive Dispensing Gun - At-13 - 817-S008013F1
10:1 Plunger for use with AT-6030 cartridges.
Weld Mount S102412100 Stainless Steel Threaded Studs, 10-24 X 3/4", 100/Case - St125-1024-12Ss-100 - 817-S102412100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount S142024100 Stainless Steel Threaded Studs, 1/4-20 X 1-1/2", 100/Case - St125-1420-24Ss-100 - 817-S142024100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount S142040100 Stainless Steel Threaded Studs, 1/4-20 X 2-1/2", 100/Case - St-125-1420-40Ss-100 - 817-S142040100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount S805002 Dual Pusher Rod For At-2010 Adhesive - 805002 - 817-S805002F1
Dual pusher rod.
Weld Mount St125102416100 Stainless Steel Threaded Studs, 10-24 X 1", 100/Case - St125-1024-16Ss-100 - 817-St125102416100F1
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Weld Mount Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.25" Tall - 100 Pack
Weld Mount Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.5" Tall - 100 Pack
Weld Mount Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1" Tall - 100 Pack
Weld Mount Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75 Tall - 6-Pack
Weld Mount Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack
Weld Mount Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 Quantity
Weld Mount Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 Quantity
Weld On Solid Steel Mini Rolle Bell Rv Rvx - 48-979022 - 388-48979022F1
Weld On W/Galv Straps 3 X 12 - W12 - 70-W12F1
Zinc Plates w/Straps
Weldmount 808100 Aluminum Wire Tie Mount, Small - At-8-100 - 817-808100F1
Use with Stainless Steel or Nylon wire ties. High tensile strength when bonded with AT-6030 adhesive. Manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.
Weldmount 809100 Aluminum Wire Tie Mount, Large - At-9-100 - 817-809100F1
Use with Stainless Steel or Nylon wire ties. High tensile strength when bonded with AT-6030 adhesive. Manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.
Weng Oil Syn Bld 25W40 @ 6 Mp Ss<92-858052K01 & 92-858055K01 - 8M0078629 - 710-92-8M0078629F1
Wesbar Rectangular Reflector, 1 X 12" White - 3387 - 274-003387F1
Rectangular with adhesive back. Class A" acrylic reflector, hermetically sealed, with an adhesive fiber backing for instant mounting.
Wesbar White Led Exterior Work Lamp, 10 Diode, Round, Bracket Mt. - 54209-002 - 274-54209002F1
Aluminum housing, stainless steel mounting stud LEDs operate from 9-36VDC with a low 10W current drawHigh power 9-36V 10WLight emission is a true whiteOnly 1.5" deep
West System 105A Resin - Quart - 105-A - 655-105Af1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System 105B Resin - .98 Gallon - 105-B - 655-105Bf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System 105C Resin - 4.35 Gallon - 105-C - 655-105Cf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System 105E Resin - 52.03 Gallon - 105-E - 655-105Ef1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System 205 Hardener, .44 Pint - 205A - 655-205Af1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System 205 Hardener, .86 Quart - 205B - 655-205Bf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System 205 Hardener, .94 Gallon - 205C - 655-205Cf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System 205 Hardener, 11.31 Gallon - 205-E - 655-205Ef1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System 207Sa Special Clear Hardener, .66 Pint - 207-Sa - 655-207Saf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System 207Sb Special Clear Hardener, .33 Gallon - 207-Sb - 655-207Sbf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System 207Sc Special Clear Hardener, 1.45 Gallon - 207-Sc - 655-207Scf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System 207Se Special Clear Hardener, 65.64 L (17.34 Gallon) - 207-Se - 655-207Sef1
Use with 105 resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with #300 pumps.
West System 209Sa Extra Slow Hardener, .66 Pint - 209-Sa - 655-209Saf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System 209Sb Extra Slow Hardener, .33 Gallon - 209Sb - 655-209Sbf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System 209Sc Extra Slow Hardener, 1.45 Gallon - 209-Sc - 655-209Scf1
Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.
West System 30625 Large Capacity 306 Metering Pump, 5:1 Ratio - 30625 - 655-30625F1
For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. Reduces mixing time and waste on large projects. Carry handle allows you to move the pump where the work is. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0.5 fl oz of resin/hardener per pump stroke (about 1 qt per minute). Can be converted to a 3:1 ratio.
West System 40328 Microfibers, Off-White, 20 Oz., 12/Case - 403-28 - 655-40328F1
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.
West System 4039 Microfibers, Off-White, 6 Oz., 24/Case - 403-9 - 655-4039F1
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.
West System 403B Microfibers, Off-White, 20 Lb. - 403-B - 655-403Bf1
A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.
West System 729 9 Oz. Glass Reinforcing Tape, 2" X 50 Yds., 6/Case - 729 - 655-729F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 72910 9 Oz. Glass Reinforcing Tape, 2" X 10', 15/Case - 729-10 - 655-72910F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 729W 9 Oz. Glass Reinforcing Tape, 2" X 50 Yds., 6/Case - C-729 - 655-729Wf1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 731 9 Oz. Glass Reinforcing Tape, 3" X 50 Yds., 4/Case - 731 - 655-731F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 732 9 Oz. Glass Reinforcing Tape, 4" X 10', 3/Case - 732 - 655-732F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 73210 9 Oz. Glass Reinforcing Tape, 4" X 10', 10/Case - 732-10 - 655-73210F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 732W 9 Oz. Glass Reinforcing Tape, 4" X 10', 3/Case - C-732 - 655-732Wf1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 733 9 Oz. Glass Reinforcing Tape, 6" X 10', 2/Case - 733 - 655-733F1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 733W 9 Oz. Glass Reinforcing Tape, 6" X 10', 2/Case - C-733 - 655-733Wf1
Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.
West System 802 Heavy-Duty Roller Pan, 12/Case - 802 - 655-802F1
An inexpensive, flexible plastic pan. Epoxy can be popped out after curing. Eliminates need for liners.
West System 802W Heavy-Duty Roller Pan, 12/Case - C-802 - 655-802Wf1
An inexpensive, flexible plastic pan. Epoxy can be popped out after curing. Eliminates need for liners.
West System 805 Poly Mixing Pot, 16 Oz., 240/Case - 805 - 655-805F1
Strong and reusable. Cured epoxy easily pops out.
West System 806 Poly Mixing Pot, 32 Oz., 180/Case - 806 - 655-806F1
Strong and reusable. Cured epoxy easily pops out.
West System 809 Notched Spreader, 36/Case - 809 - 655-809F1
Lightweight and reusable. For fairing and filling applications.Double edged. 3-1/2" x 6".
West System 88220 Vacuum Bagging Film - 882-20 - 655-88220F1
Clear, heat-stabilized, modified nylon resin film. Can be used at temperatures up to 350°F (176°C) for typical composite cure cycle times. A tough, stretchable film for high vacuum pressures.
West System 885 Vacuum Bagging Kit - 885 - 655-885F1
A complete starter kit for repairs and small laminating projects up to 13 sq. ft. Kit includes: Venturi vacuum generator1/4" I.D. Vacuum Tubing (10')Vacuum Gauge (1)Junction "T" barbs (2)Release Fabric (15 sq. ft.)Breather Fabric (15 sq. ft.)Vacuum Bag Film (15 sq. ft.)Vacuum Bag Sealant (25')Complete kit instructions002-150 Vacuum Bagging Techniques002-150 Vacuum Bagging Techniques
West System C105A Resin - 946 Ml (32 Oz.) - C-105-A - 655-C105Af1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105B Resin - 3.74 L (.98 Gal) - C-105-B - 655-C105Bf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105C Resin - 16.46 L (4.35 Gal) - C-105-C - 655-C105Cf1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C105E Resin - 197 L (52.03 Gal) - C-105-E - 655-C105Ef1
Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.
West System C205 Hardener, 208 Ml (7 Oz.) - C-205-A - 655-C205Af1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 3.56 L (.94 Gal) - C-205-C - 655-C205Cf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 42.81 L (11.31 Gal) - C-205-E - 655-C205Ef1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C205 Hardener, 814 Ml (27.5 Oz.) - C-205-B - 655-C205Bf1
Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.
West System C207Sa Special Clear Hardener, 315 Ml (10.6 Oz.) - C-207-Sa - 655-C207Saf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
West System C207Sb Special Clear Hardener, 1.24 L (42.2Oz.) - C-207-Sb - 655-C207Sbf1
Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.
