Select Category
_0x200.jpg)
Raymarine E70010 Itc-5 Transducer Converter, Power Consumption: Typical: 1.5 W, 12 V Dc, < 150 Ma Peak Operating Current - E70010 - 152-E70010F1
converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG. Transducers for Speed/Temperature, Depth, Wind and Rudder Angle can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods. Extended SeaTalkNG systems can support multiple iTC-5 unitsSeaTalkNG connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkNG backboneThe ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass)If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducersConverts analogue trandsucer signals used in i70, ST70+ and ST70 instruments
Raymarine E66085 Through-Hull Transducer - E66085 - 152-E66085F1
The B60 is a bronze, dual-frequency (50/200 kHz) through hull transducer with tilted element technology that compensates for the boat's hull deadrise, eliminating the need for a fairing block. The B60 is ideal for inshore or coastal fishing in shallow to medium depths. The bronze through-hull fitting is ideal for wood or fiberglass hulls. It comes fitted with a Raymarine 8-pin "DSM-style" connector that is directly compatible with the CP370 sonar module and legacy CP300, DSM300, DSM30 and DSM250 modules.
Raymarine E26028Pz P66 Transom Mount Depth/Speed/Temp Triducer - E26028-Pz - 152-E26028Pzf1
The P66 TRIDUCER® multisensor features a 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer's face for accurate high-speed readings and clear display images. Compatible with i40/i50 instuments.
Raymarine E26001Pz In-Hull Transducer - E26001-Pz - 152-E26001Pzf1
Is ideal for boats with fiberglass hulls looking for a fast and easy installation, high-speed performance. Comes with an innovative flange that installs on the inside of the boat's hull using quick-setting marine epoxy. No cutting or drilling is required. the transducer cap is dialed-in and locked in place for a straight-down beam and maximum echo returns. There is also no water temperature sensor on the P79 transducer.Raymarine offers the P79 transducer is multiple configurations to support traditional analog sailing instruments, NMEA200 Smart devices, as well as dual-frequency (50/200 kHz) fishfinders. Push-on 1/8" female spade connectorsFor i40, i50, iTC-5 & Legacy instruments
Raymarine E22158 Stng Backbone Kit - E22158 - 152-E22158F1
STNG Backbone Kit
Raymarine E22078 Wired Masthead Wind Transducer - E22078 - 152-E22078F1
Provides accurate measurement of relative wind speed and direction. When combined with other sensors like boat speed and compass, the masthead transducer provides the necessary wind information to calculate true wind speed, true direction and many other advanced data items. The 300mm short-arm version is the perfect choice for cruising sailboats or power boats. High performance sailing boats may prefer the 600mm long-arm version which moves the transducer farther away from the updraft of the boat's sails for enhanced accuracy. Durable anodized aluminum and UV-stabilized plastic constructionMasthead mounting block and interconnect cable includedCompatible with i60 Wind, iTC-5, ST60+ and ST60 series instruments
Raymarine E12093 Cockpit Mk Ii Wheel Drive, 3-8 - E12093 - 152-E12093F1
The Mk II Wheel Drive unit clamps directly to your boat's steering wheel delivering on both a simple installation and superb autopilot performance. It is equipped with a convenient, adjustable clutch lever that allows you to instantly switch between autopilot control and hand-steering. designed to work with steering system with between 1 and 3.5 turns lock-to-lockThe Wheel Drive unit is recommended for wheel-steered sailboats up to a maximum laden displacement of 16,500 lbs
Raymarine Devicenet Female ADP Cable - SeaTalkng - NMEA 2000
Raymarine D285 Seatalk Extension Cable, 3M - D285 - 152-D285F1
SeaTalk Extension Cable
Raymarine D244 3 Way Seatalk Junction Block - D244 - 152-D244F1
3 Way SeaTalk Junction Block
Raymarine D010 Tiller Bracket 51Mm (2") - D010 - 152-D010F1
Tiller Bracket 51mm (2")
Raymarine D006 Pushrod Extension 102Mm (4") - D006 - 152-D006F1
Pushrod Extension 102mm (4")
Raymarine CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 20° Angle
Raymarine CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 12° Angle
Raymarine CPT-S High CHIRP Bronze Thru-Hull Flush Mount Transducer - 0° Angle
Raymarine CPT-110 Plastic Thru-Hull Transducer w/CHIRP & DownVision™ f/CP100 Sonar Module
Raymarine CAM210 Augmented Reality Pack w/AR200 & CAM210
Raymarine C120W/E120W to Axiom Pro 12 Adapter Plate to New Fixing Holes
Raymarine C120/E120 Classic to Axiom 12 Adapter Plate to Existing Fixing Holes
Raymarine Bulkhead Mount Micro USB Socket w/1M Cable f/DJI Drones Only
Raymarine Black Suncover f/i50, i60, i70, i70s, p70 & p70s (eS/AXIOM style)
Raymarine B75M 600W Medium Frequency CHIRP Transducer 20° Tilt Single Operation Cable f/1 Transducer Install
Raymarine B744VL Long Stem Bronze Thru hull Tri-ducer with Fairing Block
Raymarine B744V Bronze Thru Hull Tri-Ducer w/Fairing Block
Raymarine B60-20, 20 Degree Tilted Element Transducer f/DSM300 / DSM300G / DSM250 / DSM30
Raymarine B60-12, 12 Degree Tilted Element Transducer f/DSM250 / DSM30 / DSM300 / DSM300G / CP300
Raymarine B260 Bronze Broadband Ultra-High Performance Thru-Hull w/Fairing
Raymarine B175L Bronze Low Profile Thru Hull 20 degree Tilted Element Transducer - 1kW
Raymarine B175H-W 20° Bronze Thru-Hull Tilted Element Transducer - 1kW
Raymarine Axiom™ Realvision 3D™ Adapter Cable - A80492 - 152-A80492F1
Y-Cable (25 pin to 25 & 8 pin) to attach a RealVision 3D (RV-xxx) Transducer & an Airmar (CP370 style connector) transducer to Axiom RV.
Raymarine Axiom™ Realvision 3D™ Adapter Cable - A80491 - 152-A80491F1
Y-Cable (25 pin to 25 & 7 pin) to attach a RealVision 3D (RV-xxx)Transducer & an Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom RV.
Raymarine Axiom™ Realvision 3D™ Adapter Cable - A80490 - 152-A80490F1
Adaptor Cable (25 pin to 9 pin) attach DownVision (CPT-1xx) transducer to Axiom RV.
Raymarine Axiom™ Realvision 3D™ Adapter Cable - A80489 - 152-A80489F1
Adaptor Cable (25 pin to 8 pin) to attach an existing 8 pin Airmar (CP370 style connector) transducer to Axiom RV.
Raymarine Axiom™ Realvision 3D™ Adapter Cable - A80488 - 152-A80488F1
Adaptor Cable (25 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom RV.
