Select Category

Sea-Dog 400140 All Around Light - 400140-1 - 354-4001401F1

Stamped 304 Stainless Steel. Not for new construction, for replacement of existing lighting.

Sea-Dog 4001361 Transom Light - Rectangular - 400136-1 - 354-4001361F1

This Rectangular Transom Light is for replacement of existing lighting (not for new construction). Constructed of corrosion resistant stamped 304 stainless steel. Installs with two #10 FH fasteners (not included). These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but do meet the USCG 33 CFR/ABYC A-16 from 1997.

Sea-Dog 400135 Transom Light - Round - 400135-1 - 354-4001351F1

Stamped 304 Stainless Steel. Not for new construction, for replacement of existing lighting.

Sea-Dog 400111 Replacement Lens - 400111-1 - 354-4001111F1

Replacement Lens

Sea-Dog 4001101 Fold Down All Around Light, 26" - 400110-1 - 354-4001101F1

Injection Molded Nylon/Aluminum with a white translucent lens. Folds down easily for storage.

Sea-Dog 4000801 Led Flush Mount Side Lights, Stainless, 1 Pr. - 400080-1 - 354-4000801F1

One pair includes Port and Starboard lights. Direct replacement for the 400180. LED Flush Mount Side Lights are approved for USCG 1 NM (Colreg 1 mile).

Sea-Dog 4000731 Led Side Mount Lights, Black, 1 Pr. - 400073-1 - 354-4000731F1

LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

Sea-Dog 4000711 Led Side Mount Lights, White, 1 Pr. - 400071-1 - 354-4000711F1

LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

Sea-Dog 4000701 Led Side Mount Lights, , A:3-7/8", B:2-1/4", C:1-7/8", 12V, Stainless - 400070-1 - 354-4000701F1

LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

Sea-Dog 400015 Led Removable All Around Light, 18" - 400015-1 - 354-4000151F1

Approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. Low amp draw. Requires three #8 FH fasteners (not included).

Sea-Dog 4000101 Led Fixed Mount All Around Light, 4" - 400010-1 - 354-4000101F1

LED Fixed Mount All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

Sea-Dog 4000051 Combination Bow Light, 12V - 400005-1 - 354-4000051F1

Injection molded polycarbonate/stamped stainless steel. Note: Not for new construction, for replacement of existing lighting.

Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420386-1 - 354-4203861F1

Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.

Sea-Dog 4-Position Magneto Style Ignition/Starter Switch - 420385-1 - 354-4203851F1

Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke.

Sea-Dog 4-Position Ignition Switch - 420356-1 - 354-4203561F1

Stamped brass. Functions: Acc.-Off-Ignition-Start. Rated: Ignition 15 Amp @ 12VDC, Solenoid 30 Amp @ 12VDC, Accessory 15 Amp @ 12VDC.

Sea-Dog 364190 Polycarbonate Cover For Poly In-Line Strainer - 364190 - 354-364190F1

Polycarbonate cover for strainer

Sea-Dog 3573935 Hose Klip™ - Water Hose Lock For Deck Fills, Pop Display 20/Pk - 357393-5 - 354-3573935F1

Hose Klip™ Water Hose Lock stops hose from coming out of deck fill during filling. Compression fitting locks into place for hands free operation. Fits most 1-1/2" deck fills. Patent Pending.

Sea-Dog 3573931 Hose Klip™ - Water Hose Lock For Deck Fills - 357393-1 - 354-3573931F1

Hose Klip™ Water Hose Lock stops hose from coming out of deck fill during filling. Compression fitting locks into place for hands free operation. Fits most 1-1/2" deck fills. Patent Pending.

Sea-Dog 3573901 Emergency Deck Fill Plug, Pop Display 10/Pk - 357390-5 - 354-3573905F1

The Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant Nitrile-Buna rubber.

Sea-Dog 3573901 Emergency Deck Fill Plug - 357390-1 - 354-3573901F1

The Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant Nitrile-Buna rubber.

Sea-Dog 3570141 Waste Deck Fill Fiberglass Nylon W/Black Slotted Cap, A: 1-1/2"Hose, B:2-1/2", C: 3-3/8", #10 Fh - 357014-1 - 354-3570141F1

Sea-Dog's® fiberglass filled injection molded nylon deck fills contain no metal and do not require grounding to the boats electrical system. Caps are color-coded for easy deck fill identification eliminating dangerous and potentially costly problems caused by miss-identification. 1-1/4" - 11-1/2 NPSM straight cap threads. Gas, diesel and water caps include attachment chains. Installs with three #10 FH fasteners (not included).

Sea-Dog 3570131 Water Deck Fill Fiberglass Nylon W/Blue Slotted Cap - 357013-1 - 354-3570131F1

Sea-Dog's® fiberglass filled injection molded nylon deck fills contain no metal and do not require grounding to the boats electrical system. Caps are color-coded for easy deck fill identification eliminating dangerous and potentially costly problems caused by miss-identification. 1-1/4" - 11-1/2 NPSM straight cap threads. Gas, diesel and water caps include attachment chains. Installs with three #10 FH fasteners (not included).

Sea-Dog 3570101 Gas Deck Fill Fiberglass Nylon W/Red Slotted Cap - 357010-1 - 354-3570101F1

Sea-Dog's® fiberglass filled injection molded nylon deck fills contain no metal and do not require grounding to the boats electrical system. Caps are color-coded for easy deck fill identification eliminating dangerous and potentially costly problems caused by miss-identification. 1-1/4" - 11-1/2 NPSM straight cap threads. Gas, diesel and water caps include attachment chains. Installs with three #10 FH fasteners (not included).

Sea-Dog 354-2025311 Door Hinge, White Nylon, 2/Cd - 202531-1 - 354-2025311F1

These Door Hinges are constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant stainless steel pin. Installs with six #8 FH fasteners (not included).

Sea-Dog 353210 Flush Mount Gas Tank Vent - 353210-1 - 354-3532101F1

Investment Cast 316 Stainless Steel.

Sea-Dog 3520201 Gas Tank Vent - All Thread, Chrome/Brass - 352020-1 - 354-3520201F1

Machined Brass Chrome Plated. 5/8"-18 NF x 1-13/16" thread.

Sea-Dog 3513521 Stainless Cast Pipe Deck Fill, Water - 351352-1 - 354-3513521F1

Pipe Deck Fills are constructed of corrosion resistant investment cast 316 stainless steel. Designed to be used in conjunction with 1-1/2" © 11-1/2 NPSM straight threaded pipe. Includes attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.

Sea-Dog 3513511 Stainless Cast Pipe Deck Fill, Diesel - 351351-1 - 354-3513511F1

Pipe Deck Fills are constructed of corrosion resistant investment cast 316 stainless steel. Designed to be used in conjunction with 1-1/2" © 11-1/2 NPSM straight threaded pipe. Includes attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.

Sea-Dog 3513501 Stainless Cast Pipe Deck Fill, Gas - 351350-1 - 354-3513501F1

Pipe Deck Fills are constructed of corrosion resistant investment cast 316 stainless steel. Designed to be used in conjunction with 1-1/2" - 11-1/2 NPSM straight threaded pipe. Includes attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.

Sea-Dog 3513401 Gas Deck Fill With Guard, 1-1/2" Hose - 351340-1 - 354-3513401F1

Gas hose deck fill with integral raised splash guard is constructed of corrosion resistant cast 316 stainless steel. Cap features easy-to-use tabs for key-less operation - no deck plate key required. Cap threads are 1-1/4" - 12 NPSM straight.

Sea-Dog 3513221 Hose Deck Fill , A: 1-1/2" Hose, B:3", C:3" #10 Fh,Water - 351322-1 - 354-3513221F1

Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" - 11-1/2 NPSM straight cap threads.

Sea-Dog 351110 Flip Top Hose Gas Fill, 1-1/2" Hose - 351110 - 354-351110F1

Investment Cast 316 Stainless Steel.

Sea-Dog 3375901 Flush Thru Vent, 3" Hose, Stainless - 337590-1 - 354-3375901F1

Flush Thru Vent designed for cabin or bilge ventilation. For use with 3" exhaust hose. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included).

Sea-Dog 337501 Louvered Vent, White - 337501 - 354-337501F1

Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with four #8 FH fasteners (not included). UV resistant injection molded ABS construction. Avoid contact with acetone or strong solvents.

Sea-Dog 337500 Louvered Vent, Black - 337500 - 354-337500F1

Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with four #8 FH fasteners (not included). UV resistant injection molded ABS construction. Avoid contact with acetone or strong solvents.

Sea-Dog 337426 Flush Hose Vent, Hose, A:3-9/16" , B:3-3/4", C:4-15/16", D:5/16", Hose/ Hole Size:Up To 4", Black - 337426-1 - 354-3374261F1

Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 337416 Flush Hose Vent, 4" Hose, A:3-9/16" , B:3-3/4", C:4-15/16", D:5/16", Hose/ Hole Size:Up To 4", White - 337416-1 - 354-3374161F1

Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 3374011 Louvered Vent, White, A:3-11/16" , B:9", C:4-7/8", D:10-1/8" , #8 Fh - 337401-1 - 354-3374011F1

Injection molded ABS.

Sea-Dog 337400 Louvered Vent, Black, A:3-11/16" , B:9", C:4-7/8", D:10-1/8" ,#8 Fh - 337400-1 - 354-3374001F1

Injection molded ABS.

Sea-Dog 337391 Louvered Vent, White, A:3-11/16" , B:4-1/4", C:4-7/8", D:5-1/2", #8 Fh - 337391-1 - 354-3373911F1

Injection molded ABS.

Sea-Dog 337390 Louvered Vent, Black,A:3-11/16" , B:4-1/4", C:4-7/8", D:5-1/2", #8 Fh - 337390-1 - 354-3373901F1

Injection molded ABS.

Sea-Dog 3373811 Louvered Vent, White, A: 1-7/8", B:4-1/4", C:3", D:5-1/2",#8 Fh - 337381-1 - 354-3373811F1

Injection molded ABS.

Sea-Dog 3373801 Louvered Vent, Black, A: 1-7/8", B:4-1/4", C:3", D:5-1/2", #8 Fh - 337380-1 - 354-3373801F1

Injection molded ABS.

Sea-Dog 337320 Thru Vent, Black - 337320 - 354-337320F1

Designed for cabin or bilge ventilation. Constructed of injection molded polypropylene they are UV resistant. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Vent area 3.04 square inches.

Sea-Dog 3373161 Flush Hose Vent, A: 2-13/16" , B:2-3/4", C:3-11/16", D:5/16", Hose/ Hole Size: Up To 3", Black - 337326-1 - 354-3373261F1

Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 3373161 Flush Hose Vent, 3" Hose, A: 2-13/16", B: 2-3/4", C:3-11/16", D:5/16" ,Hose/ Hole Size : Up To 3", White - 337316-1 - 354-3373161F1

Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 337310 Thru Vent, White - 337310 - 354-337310F1

Designed for cabin or bilge ventilation. Constructed of injection molded polypropylene they are UV resistant. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Vent area 3.04 square inches.

Sea-Dog 3371981 Deck Plate Lanyard - 337198-1 - 354-3371981F1

12" Lanyard is designed to retain deck plate lids. Fits all Sea-Dog® Deck Plates. Constructed of corrosion resistant 304 stainless steel. Attaches to lid with #6 RH fastener (included) and to the interior hull with a #10 RH fastener (not included).

Sea-Dog 337165Bulk Screw Out Deck Platet, 6 Black - 337165 - 354-337165Bulkf1

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 3371651 Screw Out Deck Plate, 6" Black - 337165-1 - 354-3371651F1

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 337162 Screw Out Deck Plate With Internal Collar, 6-1/2", White - 337162 - 354-337162F1

Molded with a collar on the bottom to hold deck plate bags or other round containers. Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck when installing the deck plate.

Sea-Dog 337161 White Screw Out Deck Plate W/Clear Cover, 6-1/2" - 337161-1 - 354-3371611F1

The Sea-Dog® Screw-Out Deck Plate is constructed with UV stabilized injection molded ABS and feature a clear polycarbonate lid, allowing visual inspection of the watertight compartment without removing the lid. When installing, use silicone sealant on hull or deck surface. Lubricate with Vaseline or Teflon grease. Keep threads clean with hot, soapy water. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvent.

Sea-Dog 3371601 Screw Out Deck Plate, 6" White - 337160-1 - 354-3371601F1

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 3371551 Screw Out Deck Plate, 5" Black - 337155-1 - 354-3371551F1

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 337155 Screw Out Deck Plate, 5" Black - 337155 - 354-337155F1

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 337152 Screw Out Deck Plate With Internal Collar, 5-1/2", White - 337152 - 354-337152F1

Molded with a collar on the bottom to hold deck plate bags or other round containers. Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck when installing the deck plate.

Sea-Dog 3371501 Screw Out Deck Plate, 5" White - 337150-1 - 354-3371501F1

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 337146 Black Screw Out Deck Plate W/Clear Cover, 4-1/2" - 337146-1 - 354-3371461F1

The Sea-Dog® Screw-Out Deck Plate is constructed with UV stabilized injection molded ABS and feature a clear polycarbonate lid, allowing visual inspection of the watertight compartment without removing the lid. When installing, use silicone sealant on hull or deck surface. Lubricate with Vaseline or Teflon grease. Keep threads clean with hot, soapy water. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvent.

Sea-Dog 3371451 Screw Out Deck Plate, 4" Black - 337145-1 - 354-3371451F1

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 337142 Screw Out Deck Plate With Internal Collar, 4-1/2", White - 337142 - 354-337142F1

Molded with a collar on the bottom to hold deck plate bags or other round containers. Injection molded ABS. Molded to the highest standard using top quality UV stabilizers and anti-oxidants. Use silicone sealant on hull or deck when installing the deck plate.

Sea-Dog 3371401 Screw Out Deck Plate, 4" White - 337140-1 - 354-3371401F1

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Sea-Dog 3365253 Triple Latch Rectangular Marine Hatch, Black - 336525-3 - 354-3365253F1

Sea-Dog 3365203 Triple Latch Rectangular Marine Hatch, White - 336520-3 - 354-3365203F1

Sea-Dog 3364131 Low Profile Pop-Out Deck Plate, A: 8" , B:7-1/4", C=6-1/4", D: 3/16", Black, #8 Fh - 336413-1 - 354-3364131F1

Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).

Sea-Dog 3364121 Low Profile Pop-Out Deck Plate, A: 8" , B:7-1/4", C=6-1/4", D: 3/16", White, #8 Fh - 336412-1 - 354-3364121F1

Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).

Sea-Dog 3364111 Low Profile Pop-Out Deck Plate, A: 6" , B:5-1/4", C=4-1/8", D: 3/16", Black, #8 Fh - 336411-1 - 354-3364111F1

Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).

Sea-Dog 3364101 Low Profile Pop-Out Deck Plate, A: 6" , B:5-1/4", C=4-1/8", D: 3/16", White, #8 Fh - 336410-1 - 354-3364101F1

Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).

Sea-Dog 3316011 Drain Cover, 2-1/2" - 331601-1 - 354-3316011F1

Stamped 304 StainlessVent Area .85 Sq. In.Fasteners: #6 RH

Sea-Dog 331600 Drain Cover, 3-1/4" - 331600-1 - 354-3316001F1

Stamped 304 StainlessVent Area 2.11 Sq. In.Fasteners: #6 RH

Sea-Dog 331455 Butterfly Vent - Side Knob, 5" - 331455 - 354-331455F1

Constructed of corrosion resistant 304 stainless steel. Promote air flow helping to preventing mold and mildew. Features a side knob that allows for easy adjustment of the opening. Fasteners sold separately.

Sea-Dog 331440 Butterfly Vent - Center Knob, 4" - 331440-1 - 354-3314401F1

Constructed of corrosion resistant 304 stainless steel these butterfly vents promote air flow to prevent mold, mildew and associated odors. Features a center knob that allows for easy adjustment of the opening.

Sea-Dog 3314251 Round Louvered Vent, 5" - 331425-1 - 354-3314251F1

Constructed of corrosion resistant stamped 304 stainless steel these round air ventilation louvers allow air in while keeping water out. Installs with four #6 FH fasteners (not included).

Sea-Dog 331424 Round Louvered Vent, 4" - 331424 - 354-331424F1

Constructed of corrosion resistant stamped 304 stainless steel these round air ventilation louvers allow air in while keeping water out. Installs with four #6 FH fasteners (not included).

Sea-Dog 331296 Collector Box, 3" Hose, Left Mount - 331296 - 354-331296F1

Constructed of impact resistant vacuum formed ABS for use with a louvered vent to facilitate air intake and exhaust.

Sea-Dog 331280 Stainless Louvered Vent, 10-Louver - 331280 - 354-331280F1

Stamped 316 Stainless Steel. 331280 does not have a collector box available.

Sea-Dog 331204 Collector Box - 331204 - 354-331204F1

Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342.

Sea-Dog 331203 Collector Box - 331203 - 354-331203F1

Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331203 can accept the 337600 3" collector box hose adapter.

Sea-Dog 331202 Collector Box - 331202 - 354-331202F1

Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331202 is available without holes to allow for custom installations.

Sea-Dog 331201 Stainless Recessed Louvered Vent - 331201 - 354-331201F1

Corrosion resistant 316 stainless steel. Use with a collector box to facilitate air intake and exhaust. Designed with recessed louvers to create a flush vent surface area reducing possible damage to the vent as well as preventing chafing to mooring lines, fishing lines, etc.

Sea-Dog 331200 Stainless Louvered Vent - 331200 - 354-331200F1

Corrosion resistant 316 stainless steel vents are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs w/six #6 RH fasteners (not included).

Sea-Dog 3299701 Cap & Chain For Uhf Coax Connector - 329970-1 - 354-3299701F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 3299551 Right Angle Uhf Coax Connector - 329955-1 - 354-3299551F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 3299511 Double Female Bulkhead Uhf Coax Connector - 329951-1 - 354-3299511F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 3299501 Pl-258 Double Female In-Line Uhf Coax Connector - 329950-1 - 354-3299501F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 329906 Ug176U Uhf Coax Adapter - 329906-1 - 354-3299061F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 329905 Ug175U Uhf Coax Adapter - 329905-1 - 354-3299051F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 3299021 Pl-259/Ug176U Male Uhf Coax Connector - 329902-1 - 354-3299021F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 3299011 Pl-259/Ug175U Male Uhf Coax Connector - 329901-1 - 354-3299011F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 3299001 Pl-259 Male Uhf Coax Connector - 329900-1 - 354-3299001F1

Nickel plated brass fittings for coaxial cable installation applications.

Sea-Dog 329808 50' Coaxial Cable Assembly - 329808-1 - 354-3298081F1

Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.

Sea-Dog 3298061 20' Coaxial Cable Assembly - 329806-1 - 354-3298061F1

Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.

Sea-Dog 3298041 Coaxial Cable Assembly, A:10", B: 2", C:1-3/4", D:11/16", - 329804-1 - 354-3298041F1

Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.

Sea-Dog 3298021 5' Coaxial Cable Assembly - 329802-1 - 354-3298021F1

Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.

Sea-Dog 3295171 Fixed Antenna Base, A: 1-1/2", B:3", C: 2-1/4", 1/4" Rh - 329517-1 - 354-3295171F1

Flange mount fixed antenna bracket. Formed 304 stainless steel construction. Designed to allow wire to feed directly through the base eliminating the need for a separate cable grommet. Ideal for TV, Loran, GPS and VHF antenna's with standard 1"-14 threads. Installs with three ¼" RH fasteners (not included).

Sea-Dog 3295151 Fixed Antenna Base, A: 4-1/4", B: 3", C: 2-1/4", 1/4" Rh - 329515-1 - 354-3295151F1

Flange mount fixed antenna bracket. Formed 304 stainless steel construction. Designed to allow wire to feed directly through the base eliminating the need for a separate cable grommet. Ideal for TV, Loran, GPS and VHF antenna's with standard 1"-14 threads. Installs with three ¼" RH fasteners (not included).

Sea-Dog 329235 Heavy Duty Adjustable Antenna Base - 329235-1 - 354-3292351F1

Investment Cast 316 Stainless Steel. For use with over-height whips or where extra strength and rigidity are required. Dual swiveling mounts allow for complete adjustability. Accepts any standard antenna with 1"- 14 threads.

Sea-Dog 3281971 Nylon Flagpole Pennant Mounts & Stainless Clips, 4/Set - 328197-1 - 354-3281971F1

Nylon adjustable flag pole mount clip used in conjunction with stainless steel spring wire quick release clip can be positioned and repositioned on a flag pole allowing mounting flexibility for a variety of flag or pennant sizes. Stainless spring clips are designed to hold their shape after continued use.

Sea-Dog 3281951 Stainless Flag Pole Hole Mount Pennant Clips, 4/Set - 328195-1 - 354-3281951F1

Stainless spring wire quick release clips are designed to hold their shape after continued use.

Sea-Dog 3281901 Flag Clips For 1/2" Dia Pole, Pr. - 328190-1 - 354-3281901F1

Flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips

Sea-Dog 328160 Hawse Pipe - 328160-1 - 354-3281601F1

Designed to protect the boats hull against damage from anchor line and chain while also reducing rope chafe. Investment cast 316 stainless steel construction for corrosion resistance and durability. Installs with four fasteners (not included).